词语:焊剂热度:180

词语焊剂拆分为汉字:

焊字的拼音、笔画、偏旁部首、笔顺、繁体字,焊字字源来历,焊字演变

用熔化金属或塑料来粘合、修补金属或塑料器物:~接。~工。~料。~条。~枪。……

剂字的拼音、笔画、偏旁部首、笔顺、繁体字,剂字字源来历,剂字演变

配合而成的药:~型。~量(liáng)。药~。清凉~。量词,用于若干味药配合起来的汤药,亦称“服(fù)”、“付”:一~药。做馒头或饺子等面食时,从和好的面上分出来的小块儿:面~儿。……

 

查询词语:焊剂,试一试,用焊剂来写一句话,用焊剂造句。

汉语拼音:hàn jì

 

词语焊剂基本解释

焊接时用的粒状、粉状或糊状的物质,能清除金属工件焊接部分表面的杂质,防止氧化,使容易焊接,如松香等。也叫焊药。

 

词语焊剂详细解释

  1. 焊接时用的涂料。能清除焊接金属表面的杂质,使容易焊接。常用的焊剂有硼砂、松香、盐酸等。

 

词语焊剂双语例句

双语例句
  1. A calculation that can be used to determine how much thinner needs to be added to the flux to maintain a specified specific gravity.

    用来确定向焊剂中添加多少稀释剂,以使其保持规定的比重的计算。

  2. Process changes that will have to be considered when changing from an alcohol based to a VOC-Free flux technology.

    从以酒精为基本成分的焊剂转变为无有机挥发物焊剂时必须予以考虑的工艺变动。

  3. At welding heat, the flux melts, and the oxide particles are dissolved in it together with any other impurities which may be present.

    焊接加热时,焊剂会熔化,而氧化粒子在焊剂中就会同可能存在的任何杂质熔在一起。

  4. Is superior in preservation . This allows to have mount application steady due to its less viscosity changing .

    易于储存。助焊剂的粘度变化非常少且印刷性非常稳定。

  5. Apply flux to tube and socket sparingly and with a fairly thin consistency. Avoid flux on areas not cleaned, particularly inside of tube.

    节俭地在管道和阀门插口上涂敷焊剂,使其十分均匀和细薄。要避免焊剂涂在为清理的表面上,特别是管道内侧。

  6. Do this test must be in a well-ventilated place, and to wear gloves, masks in case of water vapor and tin flux burns.

    做此试验必须在通风良好处,并戴手套,面具以防水蒸气及锡焊剂烫伤。

  7. apply flux to outside of tube and inside of solder cup . surfaces to be joined must be completely covered . use flux sparingly.

    在管道外面和焊接端口内侧涂上焊剂。需要连接的表面必须完全覆盖焊剂。要节约使用焊剂。

  8. Saponification has been a common aqueous cleaning process by chemically reacting with the acidic flux to form soap.

    作为常规的水清洗过程,皂化反应主要通过与酸性焊剂发生化学反应以产生皂化的方式完成清洗。

  9. New developments in flux chemistries for lead-free pastes do not require nitrogen to achieve good wetting and solder joint integrity.

    无铅焊锡膏的焊剂化学的新发展可以做到不使用氮气也可得到良好的熔湿性和焊点完整性。

词语焊剂百科解释:

焊剂

焊剂也叫钎剂,定义很广泛,包括熔盐、有机物、活性气体、金属蒸汽等,即除去母材和钎料外,泛指第三种用来降低母材和钎料界面张力的所有物质。