词语:厚度热度:806

词语厚度拆分为汉字:

厚字的拼音、笔画、偏旁部首、笔顺、繁体字,厚字字源来历,厚字演变

扁平物体上下两个面的距离:~度。~薄(厚度)。扁平物体上下两个面距离较大的,与“薄”相对:~纸。~重(zhòng )(a.又厚又重;b.丰厚;c.厚道而庄重)。深,重(zhòng ),浓,多:~望。不刻薄,待人好:~道(诚恳,宽容,“道”读……

度字的拼音、笔画、偏旁部首、笔顺、繁体字,度字字源来历,度字演变

1. 度 [dù]2. 度 [duó]度 [dù]计算长短的器具或单位:尺~。刻~。~量衡。事物所达到的境界:程~。高~。风~。分角的单位,一圆周角分为360度:角~。依照计算的一定标准划分的单位:温~。湿~。经~。纬~。浓~。电能的单位,……

 

查询词语:厚度,试一试,用厚度来写一句话,用厚度造句。

汉语拼音:hòu dù

 

词语厚度基本解释

扁的物体上下两面之间的距离。

 

词语厚度详细解释

  1. 扁形物体上下两面之间的距离。如:桌子面不能太薄,要有一定的厚度。

 

词语厚度双语例句

双语例句
  1. During the course of a freezing season, sea ice may form at the surface up to thickness of 2 meters at the high latitudes.

    在严寒季节,在高纬度可在海面形成厚度达2米的海冰。

  2. The gas-oil contact is a transitional zone that goes from high oil saturation to high gas saturation with a thickness of up to several feet.

    油气界面是从高含油饱和度至高含气饱和度的一个过渡带,其厚度达几英尺。

  3. It's now thicker than it is long, and, if you're trying to bend it, seems to have the structural integrity of steel.

    它的厚度比长度长得多,想再折一次比折叠成品钢还难。

  4. The thickness of ice cube and the capacity of ice storage room are both adjustable and easy to be installed.

    冰块厚度可调,储冰室冰量可调,底脚高度可调且易安装。

  5. A grinder may be used to dress the surface defects but its working depth should be no more than 10% of nominal thickness.

    冷弯型钢的表面缺陷允许用修磨方法清理,但清理深度不得超过公称厚度的10%。

  6. It seems to be helpful to osseointegration if it can effectively keep the oxidation in nanoporous and increase oxide thickness.

    若能有效增加氧化层厚度与降低植体表面孔径尺寸将对骨整合会有所助益。

  7. However, there was no association between carotid artery wall intima-media thickness and any CRP gene polymorphism in either population.

    但是,在任一总体中都没发现颈总动脉壁内膜中层厚度与任何CRP基因多肽性有关。

  8. Mud-Water Interface Detector is an electric device used to detect the depth of mud in the bottom of the tank.

    泥水界面检测仪是一种用于测量沉淀池底部污泥积累厚度的电子仪器。

  9. Though many consider snoring to be a nighttime problem, it has real consequences on your waking life, too, particularly for your wallet.

    虽然很多人认为打呼噜只是个晚上睡觉时的毛病,但是它也能影响你白天的生活,尤其是你钱包的厚度。

词语厚度百科解释:

厚度

thickness 定义:物体上下相对两面之间的距离。指物体之厚薄程度。符号“T”,单位为mm。 例: 叶片厚度:指叶片横断面叶肉的厚薄程度。 构件厚度:指带肋构件的板厚或环形构件的壁厚。 纸张厚度:打印机能够支持,并且打印的最大的纸张的厚度。 冰川厚度:冰川表面与冰底间的垂直距离。 印版厚度(plate thickness):涂布好的印版的标定厚度。 胶质层厚度:烟煤在焦化过程中不断形成的胶态层的厚度。 滤饼厚度(filter cake thickness):在进行API滤失试验或高温高压滤失试验时,沉积在滤纸上的固相沉积物的厚度。 实际厚度(real thickness)