词语:掏槽热度:147

词语掏槽拆分为汉字:

掏字的拼音、笔画、偏旁部首、笔顺、繁体字,掏字字源来历,掏字演变

挖:~一个洞。探取:~钱。~腰包。……

槽字的拼音、笔画、偏旁部首、笔顺、繁体字,槽字字源来历,槽字演变

一种长方形或正方形的较大的盛东西的器具:~子。水~。酒~。~坊。特指用来盛饲料喂牲畜的器具:马~。猪食~。~头。槽状的:~钢。~铁。~牙。两边高起,中间凹下物体的凹下部分:河~。在石头上凿个~儿。……

 

查询词语:掏槽,试一试,用掏槽来写一句话,用掏槽造句。

汉语拼音:tāo cáo

 

词语掏槽基本解释

在煤矿底部截槽或底部掏槽。

 

词语掏槽详细解释

 

词语掏槽双语例句

双语例句
  1. Experimental results show that the cut blasting effect of bottom charge is better than that of conventional charge.

    试验结果表明,底部空气柱装药掏槽爆破效果优于常规装药效果。

  2. After using local materials with empty holes, cutting holes and delayed-action detonators, the efficiency of blasting has been improved.

    在就地取材等不利条件下,通过布置空心眼、掏槽眼和采用延时雷管,提高了爆破效率。

  3. The loosening holes outside the plough cut are also drilled at an angle which improves the breakage possibility.

    在楔形掏槽眼外侧的扩槽眼也要有角度以改善爆破效果。

  4. The practice has shown that the initiation delay time is an important factor affecting cut blasting effect.

    工程实践表明,微差起爆时间是影响掏槽效果的一个重要因素。

  5. The cut way and hole parameters affect the drivage efficiency and cost.

    掏槽方式及布孔参数影响着掘进效率和成本。

  6. The study has provided a ba se for design of blasting parameters of parallel cut.

    为含空孔直眼掏槽爆破参数设计提供了依据。

  7. Determination of Rational Undermining Form of Gun-drilling Detonation in Hard Tunnel

    岩巷中深孔爆破合理掏槽型式的确定

  8. Application of the Wedge-Shaped Troughs with a Large Cross Section in Digging Tunnels of the Qinling Road

    大断面楔形掏槽在秦岭公路隧道开挖中的应用

  9. Optimization of Cutting Holes Layout for the Blasting of Roadway Excavation at a Certain Metal Mine

    某金属矿巷道掘进爆破的掏槽孔布孔优化

双语短语
  1. 组合斜眼掏槽技术

    combination inclined underholing technique

  2. 分段下部掏槽崩落开采

    sublevel undercut caving method

  3. 底部掏槽采煤法的新进展

    New advance on undercut mining method

  4. 掏槽方式及掏槽参数的优化研究

    Optimization study of undermine method and undermine parameters

  5. 三角柱直眼掏槽爆破参数研究

    Researches on Blasting Parameters of Triangle Burn Cut

  6. 直眼掏槽爆破效果的影响因素分析

    Study on the factors affecting parallel hole cut blasting.

  7. 最后探讨了掏槽控制爆破的机理。

    Finally, the mechanism of control blasting with cut hole was also discussed.

  8. 近几年来,又再度使用了裂缝掏槽。

    During recent years the seam cut has once again come into use.

  9. 裂隙岩体中掏槽爆破的影响因素分析

    Analyse on Influence Factors of Cut Blasting in Crack Rock Mass

  10. 混合掏槽技术在坚硬岩石巷道掘进中的应用

    Application of Combined Slotting in Driving Hard Rock Roadway

  11. 柱状、楔形混合掏槽在天河煤矿的应用

    The Application of Columnar And Cuneiform Mixed Cut in TianHe Coal Mine.

  12. 对直线掏槽的炮孔布置进行了优化设计。

    The cutting holes layout for straight cutting has been optimized.

  13. 平巷与立井直眼掏槽爆破的差异分析

    Difference in burn cut blasting between drift and shaft.

  14. 分段下部掏槽崩落开采水平分层充填采矿法

    Sublevel undercut caving method horizontal cut and fill stoping

  15. 某金属矿巷道掘进爆破的掏槽孔布孔优化

    Optimization of Cutting Holes Layout for the Blasting of Roadway Excavation at a Certain Metal Mine

  16. 复式桶形掏槽在岩巷深孔爆破中的应用

    Compound drum cut hole applied in deep borehole blasting of mine rock roadway

  17. 圆型隧洞超硬岩爆破进尺与掏槽方式探讨

    Discussion About Blasting Footage and Cutting Patterns of Circular Tunnel in Supper Hard Rock

  18. 掏槽方式及布孔参数影响着掘进效率和成本。

    The cut way and hole parameters affect the drivage efficiency and cost.

  19. 大别山隧道全断面开挖掏槽眼施工技术研究

    Research on the full face excavation technology of Dabie mountain tunnel

  20. 两次与整定相关的重合闸失败事故分析二次掏槽

    Analysis of two reclosing failures related to setting

  21. 空孔直眼掏槽微差起爆时间的力学模型及分析

    Mechanical Model and Analysis of Initiation Delay Time of Parallel Cut Blasting

  22. 直眼掏槽在隧洞软岩施工中的应用及爆破参数优化

    Application of burn cut to tunnel soft rock construction and blasting parameters optimization.

  23. 合理掏槽方法和爆破参数提高平巷掘进爆破率的实践

    Practice on improvement of blasting efficiency in drift excavation with reasonable cut method and blasting parameter.

  24. 在楔形掏槽眼外侧的扩槽眼也要有角度以改善爆破效果。

    The loosening holes outside the plough cut are also drilled at an angle which improves the breakage possibility.

词语掏槽相关网络短语词组

  1. 问:掏槽眼拼音怎么拼?掏槽眼的读音是什么?掏槽眼翻译成英文是什么?

    答:掏槽眼的读音是tāo cáo yǎn,掏槽眼翻译成英文是 cut-hole

  2. 问:掏槽炮眼拼音怎么拼?掏槽炮眼的读音是什么?掏槽炮眼翻译成英文是什么?

    答:掏槽炮眼的读音是tāo cáo pào yǎn,掏槽炮眼翻译成英文是 cut hole

词语掏槽百科解释:

掏槽

掏槽方式分为两类:分别为斜眼掏槽和直眼掏槽。 斜眼掏槽:方法主要包括单向掏槽、锥形掏槽、楔形掏槽和扇形掏槽。其特点是在各种岩层中均能获得较好的掏槽效果;所需炮眼数目较少,单位耗药量少;炮眼位置和倾角的精度对掏槽效果的影响较小。但钻研方向难以掌握,炮眼深度受巷道断面的限制,岩石的抛掷距离较大,爆堆分散,易损坏设备和支护。 直眼掏槽的主要方法包括缝隙掏槽或龟裂掏槽、角柱状(筒形)掏槽、螺旋掏槽及双螺旋掏槽等。其特点是所有掏槽眼都垂直于工作面布置,有利于多台钻机同时作业和机械化作业;炮眼深度不受巷道断面限制,可实现中深孔爆破;能取得较高的炮眼利用率;岩石抛掷距离较近,爆堆集中,不易破坏井壁和巷道内设备、支护结构。但需要较多炮眼和炸药消耗量较高;对炮眼的间距和平行度要求也高。